680ES-PG Petrol Pipe Cutting Power Cutter

Now with PowerGrit® - Utility cutting chain

Built to provide a combination of performance and portability for cutting in-ground utility pipe, the 680ES-PG petrol pipe cutting power cutter with PowerGrit chain will change the way to cut pipe. This affordably priced petrol power cutter, allows you to cut up to 10" deep from one side into ductile iron, cast iron, PVC, HDPE and Insituform lining and is also designed to run the full line of FORCE3® series chains. With a quick switch of guidebar, chain and drive sprocket, you have the ability to use this power cutter in masonry, stone and even reinforced concrete. Making it the most cost effective, versatile tool in your arsenal.

FEATURES AND BENEFITS

Polyester air filter designed specifically for wet cutting
Operates PowerGrit® & PowerGrit® XL pipe cutting chain
Multifunction lever controls choke, throttle advance, run and stop modes
Extended drive sprocket adapter offers easy chain assembly
Deep cutting solution for obstructed or small openings
Easy-to-start in all weather

TECHNICAL SPECIFICATIONS

Engine Type	2-stroke, Air Cooled
Displacement	76.5 cc (4.7 cu-in)
Horsepower	3.7 kW (5 hp) @ 9,500 rpm
Torque	4.1 Nm (36.3 in-lbs) @ 6,500 rpm
Engine Speed	11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle)
Chain Speed at Maximum Power	34.5 m/s (6800 ft /min)
Weight	9.5 kg (21 lbs) powerhead only
Dimensions	46 cm (18 in) length / 29 cm (11.5 in) height / 25 cm (10 in) width
Starter	Dust and water resistant
Ignition	Special water resistant electronic ignition
Fuel ratio	4% (25:1) gasoline-to-oil
Fuel Capacity	0.88 liter (0.23 gallon)
Water Supply Requirement	Minimum: 1.5 bar (20 psi)
Water Flow Requirement	Minimum: 4 lpm (1 gpm)
Guaranteed Sound Power Level, Lwa (1)	117 dB(A) (Kwa=3.0 dB(A))
Equivalent Sound Pressure at the Operator's Ear Lwa	101.0 dB(A) (K = 2.0 dB(A))
Vibration, ahv eq Concrete Cutting (2)	7.2 m/s2 (K=1.0 m/s2) Front Handle/8.5 m/s2 (K=1.0 m/s2) Rear Handle